Novelty for growing orchids - Crown pot with vertical cuts and a tray

Among the huge variety of orchid species, only a small part of them can easily grow in the substrate, while others prefer to wrap around rocky ledges, tree trunks and all other surfaces on which there is almost no soil.

Therefore, in order for the plant to actively grow and blossom, it is necessary to choose the right capacity, as which experienced gardeners recommend using the Crown pot.

What it is?

This The main container for growing orchids is the needle design., between elastic rods of which there are through holes, gaps. These rods and form the lattice walls of the pot, on the bottom of which the substrate is first laid, and then - the ground. This design is made of acrylic, complete, as a rule, is a plastic pallet in order to create a good drainage.

Features

  • This capacity is specially designed in order to bring home orchid growing conditions closer to their habitual ones. This design allows you to properly maintain the plant, virtually to avoid the possibility of stagnation of water thanks to the pallet, where you can do drainage.
  • Also allow you to freely saturate the roots of the flower with oxygen, because the pot has through holes, despite which the substrate remains inside the container.
Reference! Flower growers using such a pot note that orchids grow and bloom much more actively in them than in ordinary ones, because, as mentioned above, this container can “recreate” those wild conditions in which almost all types of orchids are accustomed to grow.

Advantages and disadvantages

To date, there is no such capacity that could be considered the most convenient and practical for growing orchids, except for the crown of the Pot. The huge color palette and minimalistic appearance allow you to place the container anywhere, because it fits in almost any interior.

For a newcomer to gardening, a Crown pot is ideal, since the drainage system can allow to simplify the care of the plant. Using such a container ensures that the roots do not rot or dry out, because through the translucent walls you can monitor their condition and take measures to eliminate problems almost immediately. It also helps to immediately establish the correct watering.

Due to the through gaps, a rapid evaporation of the liquid occurs, due to which the air around the plant becomes wet. It is in such conditions that orchids feel very good and comfortable.

Using the Crown Pot is completely safe for both humans and plants, as the acrylic from which it is made does not emit any harmful substances.

And now about what he is bad. Due to the fact that most of the roots are naked due to through holes, the plant's substrate quickly dries out and therefore needs more frequent watering. Also Due to fairly wide openings, problems with the transfer may occur.: the roots are wrapped around the rods, which is very problematic, because as a result of a couple of awkward movements, they can easily be damaged.

For which species is suitable?

The Crown pot is mainly suitable for those species that have light-loving roots that are actively involved in photosynthesis, so Falenopsis and Wanda feel very comfortable in such a capacity, while Katlee, Brassia, Oncidium and other species that are not so dependent on light, can easily grow in opaque ceramic pots.

How to choose?

For, in order to properly acquire pots, you need to follow a few simple rules:

  1. The height of the orchid and the height of the pot should be at least approximately the same (but in no case should the pot be taller than the flower!), And, accordingly, its width should accommodate the entire root system.
  2. The gaps between the pot rods should be less than the thickness of the roots so that they do not twist around the rods, which is fraught with damage during transplantation.
  3. It is very important to choose the right size, because orchids do not like cramping, as well as a large amount of substrate. You need to choose one in which the root system fits easily with a small space around the edges.

Where to buy and what is its approximate cost?

The main producer of such pots is the Moscow plant Tehosnastka. The price in their online store is about 300 rubles, and the standard height of the pot varies from 8 to 13 cm, diameter from 10 to 13 cm.

Residents of the capital can easily buy such pots in specialized stores, and those from other cities will have to order them from the online store. For example, one of the most popular is Ozon.ru, but this will already be somewhat more expensive: the 12x13 (standard size) option will cost about 450 rubles. In less popular stores can be found for 150 - 300 rubles, but the size will be slightly smaller.

Consequences of wrong choice and their prevention

Most people When choosing a pot for orchids, a major mistake is allowed, this is the wrong size. No need to look for "growth".

Important! Orchid is inherent in slow and measured growth, so do not rush. It is extremely important to find one in which the orchid will feel comfortable.
  • Choosing an overly large pot is fraught with stagnation of moisture in the substrate and further rotting of the roots of the plant. A large amount of soil simply will not have time to dry out for a certain period (7 - 10 days), despite the wide gaps between the rods of the walls.
  • In turn, a small pot can create a lack of moisture, as a small amount of soil will dry out very quickly, and the roots will not be able to fit in such a small space, which can lead to their drying.

Thanks to the Crown pot, which was specially designed with all the characteristics of orchid cultivation, this process became very simple even for beginners in this business, because such a container without problems will provide the flower with sufficient light, moderate moisture and air.

Watch the video: How to make a Cheap DIY Indoor Grow Chamber for Warm Growing Orchids and Lowland Carnivorous Plants (December 2024).